| Customization: | Available |
|---|---|
| Warranty: | 1year |
| Max.Head: | 10m |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1.Product Features | |||
| 1 | Product name | ZKSJ DC80E DC Pump |  |
| 2 | Model No. | DC80E DC pump | |
| 3 | Weight: | 2.1kg | |
| 4 | Life span: | ≥30000h | |
| 5 | Waterproof Grade: | IP68 | |
| 6 | Color: | Black | |
| 7 | EPL: | Meet ROHS requirements | |
| 8 | Material of pump shell: | PPS+30%GF | |
| 9 | Noise class: | ≤40dB | |
| 10 | Leakproofness: | ≥1MPa | |
| 11 | Insulation grade: | H Grade(180°) | |
| 12 | Working principle: | Centrifugal pump | |
| 13 | Application | Cooling circulation system, supercharging system | |
| 2.Range of application | |||
| 1 | Ambient Temperature | 3-phase controller inside for non-submersible/controller outside for submersible | |
| 2 | Liquid Type | Oil, water, and other liquids | |
| 3 | Liquid Temperature | -30°-100° 3-phase controller inside for non-submersible /controller outside for submersible |
|
| 4 | Power | DC Power Supply | |
3.Electrical parameters (only for reference) |
|||||||
| 1 | Product model: | DC80E-1260PWM DC80E1260VR DC80E-1260VS DC80E-1260S |
DC80E-2475PWM DC80E2475VR DC80E-2475VS DC80E-2475S |
DC80E-24100PWM DC80E24100VR DC80E-24100VS DC80E-24100S |
DC80E36100PWM DC80E-36100VR DC80E-36100VS DC80E-36100S |
PWM:PWM speed(50-800HZ/ 5V) VR:0~5V/Potentiometer speed VS:0~5VspeedAnalog signal speed regulation S:constant rotational |
|
| 2 | Rated Voltage | 12V DC | 24V DC | 24V DC | 36V DC | ||
| 3 | operating voltage range: | 5-12V | 5-28V | 5-28V | 5-40V | Within this range, the pump can work normally | |
| 4 | Rated current: | 5.4A(6.6A) | 3.5A(4.2A) | 5.4A(6.3A) | 3.6A(4.2A) | Closed outlet current (open pumping current) | |
| 5 | Power: | 65W(80W) | 84W(100W) | 130W(150W) | 130W(150W) | Closed outlet power (open pumping power) | |
| 6 | Max. Flow: | 6500L/H | 7000L/H | 8000L/H | 8000L/H | The flow of water when there is no takeover | |
| 7 | Max.Head | 6M | 7.5M | 10M | 10M | Static head | |
| 8 | Minimum input power supply: | 12V-7A | 24V-5A | 24V-7A | 36V-5A | ||
| 4.Additional function instructions | |||||||
| 1 | K-jam protection | When the impurity enters the rotor chamber, the rotor stops running, and the pump stops running as well. | |||||
| 2 | Dry run protection | The pump will stop working when no enough water inside pump. | |||||
| 3 | Overloading protection | When the voltage is unstable or exceeds the rated power, the pump will stop working. | |||||
| 4 | Power reverse connection | Wrong connection of the power supply(positive and negative), the water pump will stop running, and then re-connected, can work normally. | |||||
| Built-in pump driver | Suitable for non - diving installation, medium below 60 degrees | ||||||
| The pump driver is external | Submersible installation, high temperature resistance | ||||||
| Failure and maintenance | |||
| Failure | Reason | Solutions | |
| 1 | Large current and small flow | Impurities in the rotor | injection water from the outlet to clean the inside |
2 |
stop working and current is unstable | The rotor is stuck | Clean foreign matter makes rotor stuck |
| Stop working and short circuit | Control board is damaged | Change a new pump | |
| Stop working and no current | Check the power cord | Reconnect the power | |
3 |
Big noise |
Impurities in the pump | Clean the impurities |
| Air in the pump and can't get out | Put the outlet upwards, makes water no air | ||
| no water in the pump, dry run | Make sure enough water inside | ||
){kind=link}