| Warranty: | 1year |
|---|---|
| Max.Head: | 8m |
| Max.Capacity: | 1250L/H |
| Driving Type: | Magnetic |
| Material: | Plastics |
| Structure: | Single-stage Pump |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | 1 | Product name | Brush-less dc pump DC45C |  |
| 2 | Model No. | DC45C | |
| 3 | Weight: | 0.3kg | |
| 4 | Life span: | ≥30000h(continuous) | |
| 5 | Waterproof Grade: | IP68 | |
| 6 | Color: | Black | |
| 7 | Certificate: | CE,ROSH | |
| 8 | Material of pump | PPS+30%GF | |
| 9 | Noise class: | ≤35dB | |
| 10 | Bearing pressure: | 0.5MPa(5kg) | |
| 11 | Insulation grade: | H Grade(180°) | |
| 12 | Working principle: | Centrifugal pump | |
| 13 | Application | Cooling circulation system |
| 1 | Liquid Type | Water, oil, or normal acid/ alkaline and other liquids(need to test) |
| 2 | Liquid Temperature | -30°-100°( controller inside for non-submersible/controller outside for submersible) |
| 3 | Power regulation function |
|
| 4 | Power | PSU,Solar panel,Battery |
| 1 | Product model: | DC45C-1225PWM DC45C-1225VR DC45C-1225S DC45C-1225T |
DC45C-1260PWM DC45C-1260VR DC45C-1260S DC45C-1260T |
DC45C-2465PWM DC45C-2465VR DC45C-2465S DC45C-2465T |
DC45C-2480PWM DC45C-2480R DC45C-2480S (NO) |
PWM:PWM speed regulation VR:potentiometer speed regulation S:Fixed speed T:Two-phase version |
| 2 | Rated Voltage: | 12V DC | 12V DC | 24V DC | 24V DC | |
| 3 | Working voltage range: | 5-12V | 5-12V | 5-28V | 5-28V | The pump can out put constant power when the voltage is higher than rated voltage. |
| 4 | Rated Current: | 0.75A | 1.6A(2A) | 1A(1.3A) | 1.3A(1.7A) | Closed outlet current(open outlet current) |
| 5 | Input Power: | 7W(9W) | 20W(25W) | 24W(30W) | 30W(40W) | Closed outlet power(open outlet power) |
| 6 | Max. Flow rate: | 750L/H | 1000L/H | 1100L/H | 1250L/H | Open outlet flow |
| 7 | Max. Head: | 2.5M | 6M | 6.5M | 8M | Static lift |
| 8 | Min. power supply: | 12V-1A | 12V-2A | 24V-2A | 24V-2A |
| 1 | K-jam protection | When the impurity enters the rotor chamber, the rotor stops running, and the pump stops running as well. | |
| 2 | Dry run protection | The pump will stop working when no enough water inside pump. | |
| 3 | Overloading protection | When the voltage is unstable or exceeds the rated power, the pump will stop working. | |
| 4 | Power reverse connection | Wrong connection of the power supply(positive and negative), the water pump will stop running, and then re-connected, can work normally. | |
| Built-in pump driver | |
Suitable for non - diving installation, medium below 60 degrees | |
| The pump driver is external | |
Submersible installation, high temperature resistance | |
| Failure and maintenance | |||
| Failure | Reason | Solutions | |
| 1 | Large current and small flow | Impurities in the rotor | injection water from the outlet to clean the inside |
2 |
stop working and current is unstable | The rotor is stuck | Clean foreign matter makes rotor stuck |
| Stop working and short circuit | Control board is damaged | Change a new pump | |
| Stop working and no current | Check the power cord | Reconnect the power | |
3 |
Big noise |
Impurities in the pump | Clean the impurities |
| Air in the pump and can't get out | Put the outlet upwards, makes water no air | ||
| no water in the pump, dry run | Make sure enough water inside | ||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}